Product Introduction
The Lyser series analyzers adopt the high-standard design concept of industrial process analyzers. They are equipped with a 10-inch industrial touch screen, a visual measurement process interface, and an expandable multi-channel analysis system (standard 1 channel, DP type can be optionally equipped with a second sample channel). The compact structure, simple operation, extremely low maintenance and low reagent consumption design ensure the reliability and accuracy of the instrument.
Technical parameters of Lyser Series Online Total Manganese/Online manganese ion Analyzer
Measurement method: Formaldehyde oxime spectrophotometry
Measurement range: 0-1-2-10mg/L
Accuracy: ±10%
Repeatability: ±5%
Detection limit: ≤0.05mg/L
Zero drift: ±5%
Range drift: ±5%
Measurement time: Approximately 40 minutes
Measurement mode: Interval measurement (arbitrary setting from 0 to 9999 minutes) and 24-hour whole-hour time measurement mode; Single measurement and reverse control measurement
Quality control: Regular automatic calibration and automatic verification of standard solutions can be set at any time point
Calibration mode: User manual calibration; Automatic calibration can be set at any time point on a regular basis
Communication port: RS-232 RS-485 RJ45
Measurement modes: Time interval, 24-hour whole-hour time measurement mode, single measurement mode, optional
Analog signal :4-20mA
Control signals :2 channels of digital output, 2 channels of digital input
Environmental requirements: Suggested temperature (5-33)℃; Humidity ≤85%(no condensation)
Power supply :(220±22)VAC,(50±0.5)Hz
Power efficiency :≤150W
Dimensions :374*320*783 mm