Measurement principle
Inside the turbidity or suspended solids sensor, there is an integrated LED light source that can emit near-infrared light at 860nm towards the sample. The change in the amount of light generated after the beam passes through the suspended particles in the sample enables the optical detector located at 90° and 130° angles to the incident light (180° Angle for the TC/TCS series) to detect the reflected light (scattered light). The turbidity or suspended solids concentration value of the sample can be obtained by calculating the signal intensities before and after detection by the detector.
Typical applications
Aquaculture
Surface water
Environmental monitoring
Water treatment
Product Features
It adopts anti-scratch sapphire glass and equipped with an automatic scraper cleaning device inside, ensuring measurement accuracy and easy maintenance, meeting the usage requirements in harsh environments
Measurement accuracy: ± 3%（TS-LINE-D） 、± 5% (TM50D)
Resolution: 1/10/100mg/L
The cleaning function comes with a scraper cleaning function, and the interval can be adjusted
Communication output: RS485
Working temperature: 0-45 ℃
Storage temperature: -15~50 ℃
Pressure range: 0~0.4Mpa
Body material SUS316L (standard), titanium alloy (optional)
The standard cable length is 9m, and other options are available
Protection level: IP68
